Heavy duty with high precision ATC spindle from HSD Italy,the frame is made of industrial steel pipe with stress relieved,various cutting and engraving solutions for Acrylic stand,signs, wood components ,guitar and musical instruments.
|Model||FEHO 1325WS||FEHO 1530WS|
|Max Material Thickness||160mm||160mm|
|File Format||G Code or HPGL|
Base Frame: The base frame is made of heavy-duty tubular steel that is welded, precisely machined by gantry milling machine and stress relieved by vibration device so that the foundation remains true and steady over the operational life of the machine.
ATC Spindle : HSD air-cooled ATC spindle is a leader in the machining of wood, aluminum and plastics. The 9KW/12HP spindle is characterized by its’ extremely high reliability and fully programmable speeds from 6000 to 24000 RPM, it comes complete with pneumatically retractable vacuum hood,standard ER32 collets and ISO 30 tool holders.Each mechanical, pneumatic and electronic component undergoes a double testing phase that guarantees optimum quality standards.
Tool station: 8-position tool station in the rear of the machine. Easy loading and unloading of material from either side of the machine.
Controller: Industrial controller with MPG for high accuracy positioning. The controller is capable of USB flash drives and is very easy for users to do wiring and can save a lot of time. It supports 4 servo axes + 1 spindle, simultaneously interpolated axes can be 4 axes,it has power failure protection function.
Servo Motor: High-power AC Panasonic Servo motor & direct drive planetary Gearbox,the structure maximizes the torsional moment when motor power is rated,it is for high load and more smooth machining, it offers long-term maintenance-free solution.
Gear Rack : Helical Gear from Germany is featured as much lower noise and more steady meshing.
Linear Square Guide: 25MM linear square guide,it is an ultra-heavy type that achieves a deep grooved raceway with its diameter more approximate to the ball diameter and has high rigidity, vibration and shock resistance, and damping characteristics, which are required for machine tools.
Vacuum pump: 5.5kw Regenerative Vacuum pump with with motor starters, vacuum gauge, primary and secondary filters, check valve and necessary plumbing to connect to the router.It is available with 220v 380V 50-60Hz, 3 PH or 380V, 50-60Hz.There are other options to be considered. Purchasing a number of smaller pumps can help reduce cost. If you are processing sheets of material that have large parts, then a single pump can be utilized. If the nest has numerous smaller parts, then it is best to run all the pumps for maximum air flow.
Vacuum table: The vacuum table multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing. Zones can be turned off easily with the switches on the front of the machine. Gaskets can also be routed to accommodate various material sizes and styles.
Central Lubricator: Easier to lubricate the Guid units regularly,just pull it gently and oil will go when it is needed.
Nebulizer: it sends oil mist to machining surface,it is important for tool cooling and lubricating.
Automatic tool length calibration and registration, it allows for easy and accurate “Z” zero position for single and multiple tool changes through the program,saves time & error-free.
Electric Cabinet: All the electrical components are housed and wired in a mobile,doubled-doored electrical enclosure. This allows for easy access and service when needed. Every wire is tagged so that when service is required, the customer can easily navigate the cabinet.
Foot Pads make it easier to level the machine accurately.
Photoelectric Limit Switch: Un-touching ,more sensitive and durable than traditional mechanical switch,maintenance-free for long term use.